The Tuxedo Les Paul — Dressed in White
There's a reason the Les Paul Custom earned its nickname: black or white finish, gold hardware, block inlays — it just looks like it means business. This Alpine White example turns that classic formula up a notch. Whether you're playing a club stage under lights or just want to own a guitar that looks as serious as it sounds, the Custom Pro earns its keep on both counts.
This is a used example of the Epiphone Les Paul Custom Pro in Alpine White with gold hardware. It's a solidbody Les Paul through and through — mahogany body, set mahogany neck, two coil-splittable ProBucker humbuckers, and Grover tuners keeping everything in tune. It has that full, warm Les Paul voice with the added versatility of coil-splitting and an out-of-phase option built right into the controls.
This Epiphone Les Paul Custom Pro is in Good condition. The guitar is fully functional and will go through a full tech set up prior to shipping. It has finish cracks in neck by fingerboard and some slight hardware tarnish, light play wear.. Please review the photos carefully for full condition.
Mahogany Body, Maple Veneer Top
The Custom Pro is built on a solid mahogany body with a maple veneer cap — the same core formula that has defined the Les Paul sound for decades. Mahogany contributes warmth, depth, and natural sustain, while the maple veneer adds a touch of brightness and visual appeal under that gloss Alpine White finish.
Binding runs five plies deep around the body and headstock, with a single ply along the neck — giving the Custom Pro its unmistakable dressed-up look. The glued-in set neck joint keeps the neck and body resonating together as one unit, contributing to the long sustain this guitar is known for.
Neck, Fingerboard, and Feel
The mahogany neck carries a 60s SlimTaper "D" profile with a satin finish on the back — comfortable and fast without being a handful. Scale length is 24.75", and the nut width sits at 1.68" with a GraphTech NuBone nut. The ebony fingerboard has a 12" radius with 22 medium-jumbo frets and pearloid block inlays that run all the way to the first fret. The clipped ear dovewing headstock features a split-diamond pearloid inlay — the signature detail that tells you this is a Custom.
Players who spend time with the SlimTaper profile often find it makes long practice sessions more comfortable than chunkier necks, while the 12" radius keeps chord work feeling natural and bends tracking predictably across the upper frets.
ProBucker Pickups with Coil-Split and Phase
The Les Paul Custom Pro is loaded with Epiphone's ProBucker-2 at the neck and ProBucker-3 at the bridge — both four-wire designs built with Alnico II magnets and components modeled after the original Gibson PAF humbuckers. In full humbucker mode, they deliver the warm, full-bodied tone you expect from a Les Paul. Coil-splitting, activated via push/pull volume knobs on each pickup, opens up a thinner single-coil character when you want it.
Beyond the split, the neck tone control includes a push/pull phase switch. With both pickups engaged and out of phase, you get a distinctly hollow, nasal midrange quality that cuts through a mix differently than either full-hum or split mode. It's a genuine tonal option, not just a gimmick. The electronics run through full-size 500K potentiometers and an all-metal 3-way toggle selector.
Hardware
Hardware across the board is gold — consistent with the Alpine White finish and the Custom's classic tuxedo aesthetic. The LockTone Tune-o-matic bridge pairs with a gold Stopbar tailpiece; the LockTone design locks both the bridge and tailpiece in place to prevent them from moving during string changes and contributes to better sustain and tuning stability. Grover tuning machines (gold diecast) handle the headstock end with a 14:1 tuning ratio for fine, smooth adjustments.
Product Features:
-
Body: Solid mahogany with maple veneer top, gloss Alpine White finish
-
Neck: Set mahogany neck, 60s SlimTaper "D" profile, satin finish, glued-in joint
-
Fingerboard: Ebony, 12" radius, 22 medium-jumbo frets, pearloid block inlays
-
Scale Length: 24.75" with 1.68" GraphTech NuBone nut
-
Pickups: ProBucker-2 (neck) and ProBucker-3 (bridge) humbuckers, Alnico II, 4-wire
-
Controls: 2 volume (push/pull coil-split), 2 tone (push/pull phase switch on neck), 3-way toggle selector, 500K pots
-
Bridge: Gold LockTone Tune-o-matic with gold Stopbar tailpiece
-
Tuners: Grover diecast gold, 14:1 ratio
-
Binding: 5-ply body and headstock binding, single-ply neck binding
-
Hardware Finish: Gold throughout
Brand: Epiphone
Model: Les Paul Custom Pro Alpine White
SKU: U-LES-PAUL-CUSTOM-PRO-APLINE-WHITE|15091513383
Condition: Used
Since 1872, C.A. House Music has been helping musicians across the Ohio Valley find the right gear -- with real advice from a team that actually plays. We're your authorized dealer of all the big names in guitars, keyboards, band instruments, drums, pro audio, and more. With four family-owned and operated locations in Ohio and West Virginia (plus a full online store), you don't have to go far for instruments, lessons, rentals, and repairs. No matter your musical needs, our team of musicians wants to help you Play Music for Life.
